Stropuva S10U – 10kw
When the firewood is loaded, a single load burns up to about 30 hours.
A single load of sawdust briquettes burns up to 4 days.
A single load of pellets burns up to 96 hours.
Solid fuel: firewood, timber waste, sawdust, straw and peat briquettes.
Combustion duration of solid fuel load depends on its quality of fuel, outdoor and indoor temperature, thermal resistance, and other factors.
Recommended moisture ≤30%*
- 1. air damper
- 2. bi-thermal draught regulator
- 3. supporting stick
- 4. air heating chamber
- 5. smoke extraction flue
- 6. Switch damper (U – in universal boilers)
- 7. Telescopic air injection pipe
- 8. solid fuel loading doors
- 9. air distributor with a combustion chamber stabilizer
- 10. solid fuel
- 11. ash removal doors
- 12. lifting rope with a ring
- 13. hook
- 14. Flow pipe
- 15. return pipe
- 16. thermometer tip
- 17. 1,5 bars pressure safety valve tip
- 18. Bottom
- 19. grate (U – in universal and biomass boilers)
This switch damper opens an additional air channel at the bottom of the boiler under the grate. Burning coals or peat briquettes switch damper must be in a position like in the picture.
|Fuel capacity (kg)||135|
|Maximum amount of firewood (kg)||25|
|Maximum amount of wood pellets (kg)||80|
|Maximum amount of briquettes (kg)||30|
|Maximum amount of coals(kg)||75|
|Wood burning time on minimum mode (hours)||31.5|
|(according laboratory tests) on maximum mode ***||6.1|
|Wood pellets burning time on minimum mode (hours)||72|
|(according laboratory tests) on maximum mode ***||-|
|Briquettes burning time on minimum mode(hours)||96|
|(according laboratory tests) on maximum mode ***||24|
|Coal burning time on minimum mode (hours)||130|
|(according laboratory tests) on maximum mode ***||32|
|Length of firewood up to||35|
|Amount of water in the boiler||22|
|Pressure safety valve (bar)||1.5|
|Flow of heated water||250|
|Water temperature in the boiler (°C)||85|
|Minimal area of chimney flue (cm²)||200|
|Chimney diameter (mm)||180|
|Distance between boiler bottom and chimney (mm)||1494|
*Power depends on the quality of the solid fuel, heating need of the house and the chimney draught.
** The boiler output is chosen according to a heated area. E.g., solid fuel is burning the whole day (20-24 hours) in the solid fuel boiler Stropuva S20 in the 200 m² building whereas the firewood is burning almost 2 days (35-40 hours) in the solid fuel boiler Stropuva S40 in the house of the same area. A solid fuel boiler Stropuva S10 also can be used but the building will warms up slowly and the boiler would have to be loaded 2-3 times a day.
*** Combustion duration depends on the quality of fuel, outdoor and indoor temperature, thermal resistance, the power of boiler, and the way recommendations of user guide are complied (boiler installation, heated water stream, water temperature maintenance).
The product guide can be downloaded by clicking on the link below:
THITHENED CLUTCH NP D180
Pellet boiler doors
Chimney draught regulator
Near boiler piping system to connect to other solid fuel boiler, water heater and radiators (S7,S10,S20)
Pellet Burner BurnPell X Mini (26 kW)
Near boiler piping system to connect to other solid fuel boiler, water heater, radiators and underfloor heating (S7,S10,S20)
Near boiler piping system to connect to other solid fuel boiler, water heater and floor heating (S7,S10,S20)
Concrete bottom S10
Pellet container 350 l
Pellet container 450 l
Pellet container 600 l
Electronic controller (S7, S10)